50 Way Network I/O Card50 Way Network I/O Card

The 50 Way Network I/O Card provides a convenient and cost effective solution where multiple inputs and outputs are required. It is ideally suited for building control functions such as damper/fan control or sprinkler control where on/off/auto control and healthy/fault or open/closed status indication is required.

The inputs can be configured as toggle (switch) or momentary (push-button) types. The outputs are fully programmable using the powerful dynamic cause and effects rules for output groups 1-50.

In addition to the 50 I/O circuits, dedicated inputs and outputs are also provided. Status outputs include General Fire, Fault, Disablement and Test. A buzzer is also provided for audible annunciation of status changes. Inputs include buzzer mute, momentary input enable / reset and LED test.

The 50-Way Network I/O controller is a stand-alone unit with/without its own EN54-4 power supply and charger. Each input and output on the card is fully programmable using a PC.

An additional 100 LED outputs can be provided using the 100-way driver card – output groups 101-200.

Key Features

  • Over 50 programmable volt free switch/push button type inputs, easily configured via our PC-NET-003 configuration software.
  • Over 50 programmable LED driver outputs for energising and providing LED indication.
  • Large full colour graphical indication for site maps, building layouts or simply zonal indication.
  • Remote location by simply adding the type of mimic interface onto the Ad-net/Ad-net+ Network.
  • Supplementary graphical indication
  • Zonal or fully programmable LED option
  • Fully networkable
  • 3 year warranty as standard
Specification
AC Supply (Boxed Versions)220-240V AC (+10-15%) 50-60Hz 1.6A. Support for up to 2 x 12V 7Ah batteries
DC Supply (PCB) @ 24V DC18-28V DC 63mA (/FT 101mA) + 0.8mA per LED energised + 1.3mA per switch energised
Output Drive Circuit (56)3.3V 4mA current limited (for direct LED connection)
Input Circuit (58)Volt free, dry-contact inputs

Order Codes and Options

Mxp-045*(/FT): 50-Way Network I/O Controller (unboxed)
Mxs-031-2T: 2 Position trapped key switch for Mxp-045
Mxs-031-2U: 2 Position un-trapped key switch for Mxp-045
Mxs-031-3U: 3 Position un-trapped key switch for Mxp-045
Mxs-026(F): High Intensity LED (Red/Green/Yellow - Fitted)
Mxp-052(DIN): Mimic driven 10-way relay card
/FT: Denotes fault tolerant version

Compatibility

The 50 Way Network I/O Card is compatible with all MxPro 5 control panels from software revision 019-04 using the Ad-Net peer-to-peer network. 50 Way Network I/O Card is programmable using the Pc-NeT-03 Mx configuration tool from revision 4.19 onwards.

 

Advanced Fire Systems

Our fire panels and systems are known all over the world for their leading performance, flexibility and ease of installation and use.