MxPro 4Damper Interface Card

The Advanced Damper Interface is a loop driven device that utilises the Apollo protocol. The device is a fully monitored interface providing confirmation of the damper open and closed positions.

For use with dampers that are normally held open. Fail-safe operation only applicable to electrically opened & mechanically closed dampers.

Key Features

  • Damper motor drive and limit switch monitoring integrated into a single unit
  • Dual limit switch inputs for confirmation of damper-fully-open, and damper-fully-closed positions
  • Selectable monitoring on switch inputs to prevent short circuits in the wiring from giving false position readings
  • Fail-safe options in case of data errors in the communications loop
Enclosure Dimensions H x W x D mm300 x 200 x 150 - Steel IP66
ColourRAL 7032 Light Grey
PCB Dimensions H x W x D mm35 x 142 x 70
Operating Temperature-5°C to 40°C
Realative Humidity95% non-condensing (maximum)
Mains Supply230V AC, 50Hz (+10%,-15%), 30mA (plus motor load)
Motor Switch Rating1.0A
Fuse (PCB)T3.15H250V
Fuse (Fuse terminal block)T3.15H250V
Data loop current1.6mA

Order Codes and Options

Mxp-046: Damper Interface Card
Mxp-046-BX1: Damper Interface Boxed


Use with dedicated damper panels using Apollo protocol devices MxPro 4 series fire panels require version 019- 01 (or higher) program to use with Apollo protocol devices PC configuration program must be 4.10 (or higher) to support damper interface units.


Advanced Fire Systems

Our fire panels and systems are known all over the world for their leading performance, flexibility and ease of installation and use.